Spinning Shoe Rack Revolving Shoe Tower Rotating Shoe Rack Shoe Storage Rack

This Spinning Shoe Rack that operates like a Lazy Susan is a total solution for showcasing your fashionable shoes while keeping them organized, protected, and spinning 360 degrees. saving your valuable wall space.

4-Tier holds 58+ pair,
5-Tier, holds 70+ pair,
6-Tier, holds 82+ pair

8-Tier, Floor to Ceiling holds 96+ pair

Our 4-tier, 5-tier, 6-tier, 8-Tier Lazy Shoe-Sans are made out of Solid Wood and are 360 degree rotating, spinning Storage Rack solutions for Women's Shoes and Fits easily in standard and walk in closets. 

Our 8-Tier consists of two, 4-Tier units as above, one placed on top of the other, each spins independently of the other for easy access to any shoe on the Shoe Tower.

We have the largest, maximum capacity, shoe storage solution on the market today, each Tier is 28" in diameter (measured straight across) and made of Solid Wood, NOT Mdf.

Most competitive products like our Shoe San are 24" in diameter and will not hold, in many cases, more than one pair of shoes, let alone two pair. Our image has one pair per cubicle for visual clarity but in fact, holds two pair per cubicle or 12 pair for each individual tier.

In addition we offer Free Shipping, where most competitors do not.

* Each Tier Cubicle will hold two pair depending on the width of your shoe.
* Top of the Shoe-San will hold 10 to 14 pair of shoes (not on top of 8-Tier)
* Constructed with high density All Natural Wood for durability
* Great solution to free up much needed closet shelf space.

Following is an example of a Shoe_San Storage unit to Tier specifications...match any combination number of tiers to meet your shoe storage needs. Example of Tier cubicle heights:

Four Tier...holds 58+ pair

Tier 1: 9" for running shoes
Tier 2: 9" for flat heels
Tier 3: 9" for low heels
Tier 4: 9" for high heels

then add..Fifth Tier...holds 70+ pair

Tier 5: 10" for high heels

then add..Sixth Tier...holds 82+ pair

Tier 6: 10" for stiletto heels

Top can be used for boots or extra shoes up to 10 - 14 pair.

You can specify the 1st Tier ( 14" high) for Boots for a nominal $40.00 up-charge, this will add an additional 6 inches to the height of any of the above Shoe Storage units. If you request the boot tier, we will send a PayPal invoice to your email address for the $40.00 upgrade charge.

The unit comes in several colors to include Antique White.

Each Wood round used in our Shoe-San's is 28" in Diameter (measured straight across the round tier) with a 1/2" low profile height. 

Height of the Shoe-San's...from Floor to Top of the unit:

4 Tier...46 inches
5 Tier...52 inches
6 Tier...62 inches

8 Tier...94 inches

This Shoe Storage Lazy Susan system fits perfectly in most closets and our premium craftsmanship makes this Multi Tiered shoe storage unit made of long lasting commercial All Natural Wood, and fits seamlessly inside most standard closets and all Walk-In Closets.

This not a piece of furniture, it is a shoe storage system. The partitions connections (see image) are made using the KREG system. KREG Joinery™ is an incredibly fast, strong, and simple way of joining wood. It essentially involves drilling two holes at an angle into each partition, and then joining it to the tier round above and below with self-tapping Philips screws.

 Our 360-degree, rotating shoe storage Shoe-San is the most cost-effective shoe storage solution on the market today so you can spend more money on shoes and spend less time on figuring out where to put them. Save most of your closet wall space with the Shoe-San in place.

Our uniquely designed Turntable system results in a silky smooth 360-degree capability for instant access to any shoe on the Shoe-San. The Shoe-San has the best precision ball bearing (silicon lubricated) on the market today.

Our bearing mechanism delivers a superb quiet and smooth operation and is attached to a 24" x 24" diameter, 1 1/4" thick Wood round turntable platform for stability, balance and ease of rotation, plus the metal anodized ball bearing mechanism positioned between the first tier Susan round and the 24" wood turntable platform is rated at 500 pounds weight capacity. Ball Bearings are Silicon Oil lubricated with an extremely smooth rotation that also resists moisture and rust.

The bottom turntable unit ships complete. You can assemble ALL tiers by following our simple easy to follow assembly instructions. All you need is one Phillips Screwdriver, 10 minutes time per tier...that's it!...Easy as Pie to assemble!

The Shoe Storage unit, depending on the number of tiers, can weigh up to 90 pounds as is the 8-Tier unit. We use FedEx, Home Delivery exclusively to ship and deliver to your home. We may also need your contact telephone number for FedEx to contact you if necessary to deliver your Shoe-San on a timely basis.

If your delivery address is west of the Misissippi or the West Coast, a $50.00 sgas surcharge handling fee charge by FedEx will result in a shipping fee addition to our Free Shipping, a PayPal invoice will be sent to your email address for payment prior to shipping.

The Shoe-San, Shoe Storage Rack, is a Must Have Closet Space Saver Masterpiece for all Trendy Woman. Each Shoe-San is handmade when your order is placed.

Each Shoe-San is a Special Project and is constructed after your order is placed. We have a 100% Damage Replacement Policy if the unit is damaged by FedEx during shipment which must be reported to us, complete with pictures of the content and box damage no later than the day after delivery. Please send pictures of the box and damaged contents to us.

Any questions, contact me before you purchase and I will contact you same day.

Handmade in the USA by Handmade expert Artisans in North Wales, PA., and Livingston, TX
"If we don't make it, we don't sell it"